Motorola WA840G - Manual (Page 18)

WA840G 2-1
Section 2:Installation
To get your network up and running:
! Set up your hardware.
! Insert the CD-ROM for Software Setup. Follow the prompts.
If you prefer to set up the access point’s software manually, refer to
the Manual Software Setup found in this section.
The following sections provide detailed instructions for completing
these tasks.
Hardware Setup
Hardware setup includes:
! Antenna Installation: verifying the antenna is connected to the
access point.
! Physical Installation: where you physically place your access
point.
! Electrical Connection: how to power your access point.
Antenna Installation
When shipped, the antenna is connected to the access point. If for
some reason you need to detach and reattach the antenna to the
main access point:
1 Locate the antenna threaded knob on the back of the access
point.
2 To remove the antenna, unscrew the antenna connector
counter-clockwise