Motorola WA840G - Manual (Page 20)

INSTALLATION SECTION 2
WA840G 2-3
Vertical Installation
1 Insert the access point into the supplied base. Ensure that the
antenna’s location is on top. The access point’s foot slides snugly
into the base to keep the access point stable.
2 Follow the installation procedures for connecting and configuring
the access point.
Wall Mount Installation
If you mount the access point on the wall, you must:
! Position the access point as specified by the local or national
codes governing residential or business communications
services.
! Follow all local standards for installing a network interface
unit/network interface device (NIU/NID).
If possible, mount the access point to concrete, masonry, a wooden
stud, or other solid wall material. Use anchors when necessary; for
example, if you must mount the access point on drywall.