Motorola WA840G User Manual
Page 48

CONFIGURATION
SECTION 3
WA840G
3-11
Field Description
Wireless MAC
Access Control
List
Enables you to control which device accesses
your wireless network based upon their MAC
address. The default is disabled. The options
are:
Enable Select to enable/disable the MAC
Access Control List (ACL). When
disabled, the MAC ACL is not
active and any wireless station is
allowed to communicate with the
wireless access point.
Allow
Allows only the wireless devices in
the ACL to communicate with the
wireless access point.
Deny
Denies wireless devices in the ACL
from communicating with the
wireless access point.
To add a MAC address to the ACL:
1 Check enable.
2 Select Allow or Deny from the drop-down
list.
3 Enter a MAC Address or use one of the
Learned MAC Addresses. To use one of
the Learned MAC addresses, click the
address number. The number automatically
appears in the Wireless MAC Address
Control List.
To alter a MAC address, remove and
replace with the updated address.
4 Click Add to enter the address into the
ACL.
5 Click Apply to save.
To delete a MAC address from the ACL:
1 Click the MAC address you wish to delete.
Once activated, the field will change color.
2 Click REMOVE to clear the address.
3 Click APPLY to save.