beautypg.com

Motorola PR400 User Manual

Page 98

background image

August, 2004

6881096C24-A

8-12

Non-Keypad Model Disassembly and Re-assembly: Disassembling and Re-assembling the Radio — General

8.4.3.5 PTT Re-assembly

1.

Place the PTT seal over the ridge around the top hole. Press down to seat the seal around the
ridge.

2.

Place the bottom tab in the slot inside the front housing PTT opening. Slightly slide down the PTT
and bow it by placing one finger under the middle of the PTT, so that the top tab can be aligned
and inserted into the top slot (

Figure 8-15

a).

3.

Press the PTT assembly against the front cover opening (

Figure 8-15

b).

Figure 8-15. PTT Re-assembly

a. Place bottom tab into bottom slot.
Place top tab into top slot.

b. Push down on PTT toward bottom
of radio so hooks do not get crushed.

See also other documents in the category Motorola Radio Stations: