MITSUBISHI ELECTRIC SDP-Eco 1630 III User Manual

Page 38

SDP-Eco1630 III USERS MANUAL

- 30 -

(2) Exposure

1) Press the

key to call up

display. Move the

cursor to the Laser Test Expo. display and press the

key.

2) After Laser Test Expo. display appears, Y N is displayed. Choose

'Y' with the cursor key and press the

key. The laser test

exposure will start. (Refer to '6-2 Laser menu')

- When the cursor key is at 'N', press the

key to call up the

display.

- After completion of the test exposure, press the

key once to call up the

display and press the

key oncemore to return to

- When re-adjustment of the light intensity is necessary, change the light

intensity value following step (1)-6 in the procedure above.

[Exposure Clear]
The image data which remains in the hard disk drive will be re-exposed if
exposure is interrupted during remote exposure (e.g., because of a plate end
signal). It is possible for the hard disk to keep up to 2 separations of image
data. Image data that has been exposed can be re-exposed.
1. Press the

key to call up the

display.

2. Select the

key and press the

key to move to the display

for re-exposure.

3. Select

in the

display. Pressing the

key

shows the display for selecting unexposed or exposed data.

4. Pressing the

key in the

display brings up the

display.

Unexposure EXEC

............Image data on the hard disk drive, which has not

yet been exposed.

Exposed EXEC

.................Image data which has already been exposed.

Select EXEC and press the

key to start

exposure.

5. Select

and press the

key to erase image data on the

hard disk drive.

When

is displayed, use the

key (the red reset key)

to return to the previous window. Then press the

key to return to the

window.

Though the hard disk drive can keep image data for up to 2 separations, you

cannot select the separation data to be output.

< Plate Data >

Non Exposure Data

Note

ENT.

Exposure Clear

ENT.

Unexposure EXEC>

ENT.

Exposure Clear

Exposure

ENT.

< Image Data >

< Plate Data >

Start OK

Laser Test Expo.

ENT.

Note

ENT.

Laser Test Expo.