Motorola BALI - Manual (Page 45)

43 Bluetooth® connections
Turn Bluetooth power on/off
Set Bluetooth power to be on whenever your phone
is on.
Find it: > C Bluetooth
Press Turn On (the right soft key).
Note: To extend battery life when you are not actively
using a Bluetooth connection, turn Bluetooth power off
by using this procedure and pressing
Turn Off . If you
turn off Bluetooth power, your phone will not connect
to other Bluetooth devices until you turn on Bluetooth
power and then reconnect.
Place phone in discovery mode
Allow an unknown Bluetooth device to discover your
phone:
Find it: > C Bluetooth
1 Press Options .
2 Scroll to Discovery Mode and press .
3 Scroll to On and press .
The following message appears: Discovery on: For
one minute other devices can find you .
If the device requests permission to bond with your
phone, press
YES and enter the device PIN code to
create a secure connection with the device. (The PIN
code is typically set to
0000 .)
Note: See the instructions that came with your device
for the device’s PIN code and other information about
the device.
Pair with headset, handsfree device, or
computer
Note: Network/Service dependent.
Note: If you want to use your Motorola Bluetooth
headset with both an audio device and your phone,
use your phone’s Bluetooth menus to connect the
phone with the headset. If you establish the
connection by pressing a button on the headset, or if
you allow the headset to connect automatically by
turning it on, you may experience unexpected results.
Before you try to connect to another Bluetooth device,
make sure your phone’s Bluetooth power is
On and the
device is in pairing or bonding mode (see the user
guide for the device). You can connect your phone with
only one device at a time.
Find it: > C Bluetooth
1 Press to select Add New Device .
Note: If your Bluetooth power is not turned on, your
phone will prompt you to turn it on.
2 When you see Place the device you are connecting
to in discoverable mode , press .