MITSUBISHI ELECTRIC WT-46805 - Manual (Page 34)

34
Select Fixed if your Audio
Receiver or Stereo System
has a remote control. This
allows you to adjust the
volume with that remote.
Select Variable if your Audio
Receiver or Stereo System
does not have a remote. This
allows you to use the TV to Audio
Output
Setup Menu, continued
SETUP MENU
AV CONNECTION menu
(Home Theater)
AV Network : Off
TV (Internal) :On
Speakers
AV Receiver :Mits A
Audio Output :Variable
TV Volume Control
ADJUST to select item then
move to and change option
MENU to return
MAIN MENU
Display the on-screen menus
in either English or Spanish
(Español). The first time your
television was powered on,
you were requested to select
an on-screen menu language.
If the current selection is
correct, you do not need to
change it.
SETUP menu
MEMORIZE CHANNELS :Ant-A
Cable
CLOCK
AV CONNECTION
(Home Theater)
Language :English
(Idioma)
ASSIGN INPUT
ADJUST to select item then
move to and change option.
ENTER for menu or to start
MENU to return
MAIN MENU
Language
None
When you have not connected an AV receiver monitor video output to the TV INPUT-1 video
input. The TV will send a video signal to the TV Monitor output.
Mits-A
When you have connected a Mitsubishi digital AV receiver (digital surround sound) model M-VR
800 or M-VR1000. This also activates the Home Theater IR system (see page 67 for correct IR
system operation information).
Mits-B
When you have connected a Mitsubishi digital AV receiver (digital surround sound) model M-
VR700, M-VR900 or one introduced in 1999 or later. This also activates the Home Theater IR
System (see page 67 for correct IR system operation information).
Other
When you have connected any other Mitsubishi AV receiver or another brand of AV receiver. This
also blocks signal output from the TV Monitor output when the TV is set to INPUT-1.
AV Receiver choices: