MITSUBISHI ELECTRIC WT-46805 - Manual (Page 23)

23
* Using the Number buttons:
For non-DTV channels:
When changing channels directly, you can change them faster by:
1. entering three numbers; for channel 2, press 002
2. press number and ENTER; for channel 2, press 2 then .
For DTV channels when an optional HD-1080 receiver is con-
nected:
1. Use the number buttons to select the one or two digit major channel.
2. Press .
3. Use the number buttons to select the one or two digit minor channel
(if available).
Two asterisks will display if no minor channel exists: 17.**
Two question marks will display while TV is looking for minor channel: 12.??
1 2 3
5 6
7 8 9
0 SQV QV
4
SUB
CHANNEL
GUIDE
Changing Channels
Remote Control Channel Selection
There are several ways to select channels with the remote control:
OR
ENTER
Numbers*
enter the number, the
channel will change
in 4 seconds, or
after the third number
Channel
press to view channels in
order, including DTV
channels (when optional
HD-1080 receiver is
connected)
SQV (SuperQuickView TM )
press to see stored
SQV channels, in order
QV (Quick View TM )
press QV to see the last
channel selected
SUB
When optional HD-1080
receiver is connected, use
after choosing a major DTV
channel, to enter minor (sub)
channel
SUB
GUIDE
Displays DTV Channel Guide
(when optional HD-1080
receiver is connected)