MSI MS-6566 - Manual (Page 70)

Appendix A
A-2
Installing MSI Smart Key
Installation
Simply follow the few steps below, you can install the Smart Key into
your computer very easily.
1. Turn off th e computer.
2. Locate the USB port on your computer.
3. Co nne ct t he cab le to the USB po rt, an d th en plu g t he Smart Key
into the connector properly.
4. Turn on the computer, and now you can implement this power-
ful fe ature.
Note: After you have installed the Smart Key into your co mputer, the
BIOS will detect it when the system boots up, and you have to enabled/
disabled this function. Furthermore, you should install the dedicated
software application in the operating system, which is provided by MSI,
to obtain the overall protection on your system. The following sections
will provide the detailed instructions for the BIOS setup and software
installation.
System Requirements
Befo re you use th e MSI Smart Key, pl ease ch eck th e hardware, soft-
ware and operating syst em requirements first.
Operating System Windows 98/ME/2000/XP
Connector USB port
Disk Space At least 2 MB to install the
software application