MSI MS-6566 - Manual (Page 65)

Chapter 3
3-24
Load High Performance/BIOS Setup Defaults
The two opt ions on t he ma in menu allow use rs t o restore all of t he B IOS
settings to High Performance defaults or BIOS Setup defaults. The High Per-
formance Defaults a re the default values set by the mai nboard manufacturer
for the best system performance but probably will cause a stability issue. The
BIOS Setup Defaults are the default values also set by the mainboard manufac-
turer for stable performance of the mainboard.
When you select Load High Performance Defaults, a message as below appears:
Pressing ‘Y’ loads the default BIOS values that enable the best system
performance but may lead to a stability issue.
The option is for power or overclockin g users only. Use of high
performance defaults will tighten most timings to increase the sys-
tem performance. Therefore, a high-end system configuration is a
must, which means you need high-quality VGA adapter, RAM and
so on. We don’t recommend that us ers s hould apply the h igh
performance defaults in their regular systems. Otherwise, the sys-
tem may become unstable or even crash. If the system crashes or
hangs after enabling the feature, please CLEAR CMOS D ATA to
resolve the problem. For more information, refer to “Clear CMOS
Jumper:JBAT1” in Chapter 2.
WARNING!
When you select Load BIOS Setup Defaults, a message as below appears:
Pressing ‘Y’ loads the default values that are factory settings for stable system
performance.