MSI MS-6566 - Manual (Page 66)

AMI BIOS Setup
3-25
Supervisor/User Password
When you select Supervisor Password, a message as below will appear on the
screen:
Typ e the password, u p to six ch aracte rs in lengt h, an d press . The
password typed now will replace any previously set password from CMOS
memory. You will be prompted to confirm the password. Retype the password
and press . You may also press to abort the selection and not
enter a password.
To clear a set password, just press when you are prompted to enter the
password. A message will show up confirming the password will be disabled.
Once the password is disabled, the system will boot and you can enter Setup
without entering any password.
When a password has been set, you will be prompted to enter it every time you
try to enter Setup. This prevents an unauthorized person from changing any
part of your system configuration.
Addit ionally, when a password is en abled, you can also have AMIBIOS to
request a password each time the system is booted. This would prevent unau-
When you select User Password, a message as below will appear on the screen: