Motorola DS3478 - Manual (Page 56)

4 - 2 Symbol DS3478 Product Reference Guide
Scanning Sequence Examples
In most cases, scan only one bar code to set a parameter value. For example, to set the beeper tone to high, scan
the High Frequency (beeper tone) bar code under
Beeper Tone on page 4-4 . The digital scanner issues a fast
warble beep and the LED turns green, indicating a successful parameter entry.
Other parameters, such as Decode Session Timeout, require scanning several bar codes. See the parameter
description for this procedure.
Errors While Scanning
Unless otherwise specified, if you make an error during a scanning sequence, re-scan the correct parameter.
User Preferences Default Parameters
Table 4-1 lists the defaults for user preference parameters. To change any option, scan the appropriate bar code(s)
provided in User Preferences on page 4-3 .
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 4-1 User Preferences Default Table
Parameter Default
Page
Number
User Preferences
Set Default Parameter All Defaults 4-3
Parameter Scanning Enable 4-3
Beeper Tone Medium 4-4
Beeper Volume High 4-5
Power Mode Reduced 4-5
Beep After Good Decode Enable 4-6
Picklist Mode Disabled Always 4-7
Decode Session Timeout 3.0 seconds 4-8
Fuzzy 1D Decoding Enable 4-8
Decode Mirror Images Never 4-9
Connection Maintenance Interval 15 minutes 4-10
Radio Output Power Bluetooth Class 1 4-12
Parameter Broadcast Enable 4-12
Single Point/Multipoint Operation Single Point 4-13