Connecting a synapse cable interface, Reestablishing a lost connection to host, Mounting the cradle – Motorola DS3478 User Manual
Page 26
1 - 6
Symbol DS3478 Product Reference Guide
Connecting a Synapse Cable Interface
Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable detects the host.
Figure 1-5
Synapse Cable Connection
1.
Plug the Synapse adapter cable into the bottom of the digital scanner cradle, as described in
Cables to the Cradle on page 1-5
2.
Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart Cable and plug the cable in.
3.
Connect the other end of the Synapse Smart Cable to the host.
Reestablishing a Lost Connection to Host
If scanned data does not transmit to the cradle’s host, ensure you connected all cables securely, including the
power supply. If scanned data still does not transmit to the host, reestablish connection with the host:
1.
Disconnect the power supply from the cradle.
2.
Disconnect the host interface cable from the cradle.
3.
Wait three seconds.
4.
Reconnect the host interface cable to the cradle.
5.
Reconnect the power supply to the cradle.
6.
Re-establish pairing with the cradle.
Mounting the Cradle
For information on mounting the cradle, refer to the documentation included with the cradle.
NOTE
Refer to the Synapse Interface Guide provided with the Synapse cable for more information.
Synapse adapter cable
To digital scanner cradle
Synapse Smart Cable
To host