beautypg.com

User-programmable supplementals, Upc/ean supplemental redundancy, Upc/ean supplemental – Motorola DS3478 User Manual

Page 184: Efix, User-programmable supplementals on, User-programmable

background image

13 - 12 Symbol DS3478 Product Reference Guide

User-Programmable Supplementals

If you selected a Supplemental User-Programmable option from

Decode UPC/EAN Supplementals on page 13-9

,

select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric
bar codes beginning on

page D-1.

Select User-Programmable Supplemental 2 to set a second 3-digit prefix.

Then select the 3 digits using the numeric bar codes beginning on

page D-1.

UPC/EAN Supplemental Redundancy

If you selected Autodiscriminate UPC/EAN Supplementals, use this option to adjust the number of times to
decode a symbol without supplementals before transmission. The range is from two to 30 times. 14 or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals. The default is 10.

To set a decode redundancy value, scan the following bar code. Next, scan two numeric bar codes from

Appendix

D, Numeric Bar Codes

. Use a leading zero for single digit numbers. In case of an error, or to change the selection,

scan Cancel on

page D-3

.

User-Programmable Supplemental 1

User-Programmable Supplemental 2

UPC/EAN Supplemental Redundancy