Motorola DS3478 - Manual (Page 205)

Symbologies 13 - 33
Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 for any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - This option allows the digital scanner to decode only those Code 93 symbols containing a
selected length. Use the numeric bar codes in
Appendix D, Numeric Bar Codes to select the length. For example,
to decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed
by 4. In case of an error, or to change the selection, scan Cancel on
page D-3 .
Two Discrete Lengths - This option allows the digital scanner to decode only those Code 93 symbols
containing either of two selected lengths. Use the numeric bar codes in
Appendix D, Numeric Bar Codes to select
lengths. For example, to decode only Code 93 symbols containing either 2 or 14 characters, select Code 93 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel
on
page D-3 .
Length Within Range - This option allows the digital scanner to decode a Code 93 symbol within a specific
length range. Use the numeric bar codes in
Appendix D, Numeric Bar Codes to select the length range . For
example, to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 - Length
Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to
change the selection, scan Cancel on
page D-3 .
Any Length - This option allows the digital scanner to decode Code 93 symbols containing any number of
characters within the digital scanner’s capability.
Enable Code 93
*
Disable Code 93