Scanner emulation host parameters, Scanner emulation host, Beep style – Motorola DS3478 User Manual
Page 162: Scanner emulation host parameters -4, Scanner emulation host -4, Beep style -4, Scan
11 - 4 Symbol DS3478 Product Reference Guide
Scanner Emulation Host Parameters
Scanner Emulation Host
Scan the following bar code to enable the scanner emulation host.
Scanner Emulation Host
Beep Style
The scanner emulation host supports three different beep styles.
•
Beep On Successful Transmit (default): The digital scanner beeps when the attached decoder issues the
decode signal to the digital scanner. This way, the digital scanner and the decoder beep at the same time.
•
Beep at Decode Time: The digital scanner beeps on its decode. This results in a double beep sequence
from most decoders, since the digital scanner beeps, and the decoder beeps (at a different frequency) when
it successfully decodes the output.
•
Do Not Beep: The digital scanner does not beep; the attached decoder issues the decode beep.
In all cases, if an error occurs, the digital scanner issues error beeps.
*Beep On Successful Transmit
Beep at Decode Time
Do Not Beep