Rts line state, Beep on -16 – Motorola DS3478 User Manual
Page 114
7 - 16 Symbol DS3478 Product Reference Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select the Low RTS or
High RTS line state.
Beep on
Single Point Mode Only
If you enable this parameter, the digital scanner issues a beep when it detects a
serial line.
*
Host: Low RTS
Host: High RTS
NOTE
This parameter is not supported in Multipoint mode.
Beep On
(Enable)
*
Do Not Beep On
(Disable)