Motorola DS3478 - Manual (Page 231)

Symbologies 13 - 59
GS1 DataBar Expanded
Convert GS1 DataBar to UPC/EAN
This parameter only applies to DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a composite
symbol. Enable this conversion to strip the leading '010' from DataBar-14 and GS1 DataBar Limited symbols
encoding a single zero as the first digit, and report the bar code as EAN-13.
When the digital scanner decodes bar codes beginning with two or more zeros but not six zeros, it strips the
leading '0100' and reports the bar code as UPC-A. The UPC-A Preamble parameter to transmit the system
character and country code applies to converted bar codes. Note that the digital scanner cannot strip the system
character or the check digit.
*Enable GS1 DataBar Expanded
Disable GS1 DataBar Expanded
Enable Convert GS1 DataBar to UPC/EAN
*
Disable Convert GS1 DataBar to UPC/EAN