MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 94)

93
3.13.3.6 Monitoring Dip switch setting of PI Controllers
(1) Click [Option] in the PI controller (60MC)
measurement value monitoring screen and
select [DIP switch setting monitoring] in
the sub-menu.
(2) The DIP switch setting is monitored, and
DIP switch setting monitoring screen
will appear.
* The pressed (sunken) button shows
the current status.
(3) Click [File output] to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.8.]
(4) Click [Close] to return to the PI controller (60MC) measurement value monitoring screen.
3.13.3.7 Power failure/restoration history
(1) Click [Option] in the PI controller (60MC)
measurement value monitoring screen and
select [Power failure/restoration history] in
the sub-menu.
(2) The power failure/restoration history is monitored,
and Power failure/restoration historyscreen
will appear.
Up to 20 of the latest data can be displayed.
[Date/Time]
The date and time when power
failure/restoration occurs is shown.
[Power supply status]
The status, power failure or power restoration,
is shown.
(3) Click [File output] to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.8.]
(4) Click [Close] to return to the PI controller (60MC) measurement value monitoring screen.