MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 33)

32
3.5 Function Selection Operations
(1) First, click on the desired [Function Selection
Button].
(2) Next, click on the Unit to Operate.
(3) The screen will move to the various operation
screens.
(4) If the wrong function selection button is clicked, click
on that button once again and the other function
selection buttons will be enabled.
3.6 Connecting Information
* Items Performed Here
- Indoor units connected to outdoor units, interlock units and the operation group SC (such as system
controller and remote controller) connected to indoor units can be monitored here.
- Select and double-click the interlock units and operation group SC (remote controller only), the
Connecting Information Screen will display as a pop-up menu.
The screen displays addresses and attributes of the units connected to the select unit.
3.6.1 Screen Transfer Operation
(1) Click on on the Main Screen.
(2) Click on the for the outdoor unit to be monitored.
- Only outdoor units can be selected.
(3) Momentarily, the message “Monitoring! Please wait
for a moment.” will appear.
NOTE:
" Stop mail communication" is a function to stop the operation monitor mail transmission of G-50A under
[mail communication mode] set in Chapter 3.7. It has no relation with (2)-2 E-mail connection mode of
1.1.2 On-line Monitor (via G-50A).
NOTE:
Even with the direct expansion type, when units other than outdoor units are selected by
(2), the screen returns to the Main Screen (where it waits for function selection input).