beautypg.com

MITSUBISHI ELECTRIC WT03939X20 User Manual

Page 88

background image

87

3.13.2.6 Out-of-limit alarm history

The history of out-of-limit alarm/alarm-off is displayed. Up to 100 of the latest data can be displayed.

(1) Click [Option] in the AI controller (63MC) measurement

value monitoring screen, and

select [Out-of-limit alarm history] in the sub-menu.



(2) The out-of-limit alarm history is monitored, and

Out-of-limit alarm historyscreen will appear.

[Date/Time]

The date and time when the alarm is
activated/deactivated is shown.

[Interlock signal contact output]

The output status of interlock signal contact is
shown.

[Alarm status]

The alarm status (out-of-limit alarm ON or OFF)
is shown.

[Measurement value]

The measurement value when an alarm is
detection/cancellation is shown.

(3) Select the channel [Ch1] or [Ch2] to be monitored using the pulldown.




(4) Click [History clear] to clear the history of out-of-limit alarm/alarm-off.

1)Click [History clear].
2)The message ”Do you want to clear the history?”

will appear, and click [Yes] .

3) The message ”The history was cleared.”

will appear., and click [OK].






(5) Click [File output] to save the monitored information as a CSV file.

Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.7.]

(6) Click [Close] to return to the AI controller (63MC) measurement value monitoring screen.