MITSUBISHI ELECTRIC WT03939X20 User Manual
Page 7
6
1.2.2 Required Materials
The following materials are needed for operating the Maintenance Tools :
(1) In case of routing via MN converter
MN Converter (CMS-MNF,CMS-MNF-B,CMS-MNG-E), Personal Computer, RS-232C cross cable, USB
cable(CMS-MNG-E) and modem in the case of remote connection, are required. RS-232C is to be straight
cable in this case.
For detail, please see Installation Manual-annexing of MN Converter
(CMS-MNF,CMS-MNF-B,CMS-MNG-E).
(*The power consumption factor of the M-NET circuitry of CMS-MNG-E is "1.5" (equivalent to 1.5 Indoor unit)).
(2) In case of routing via G-50A
G-50A, personal computer, LAN cable (Straight) and HUB.
A dial-up router is required for remote communication. For the dial-up router to be used, employ that
allowing data communication by receiving external telephone transmission.