MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 85)

84
3.13.2.2 Setting for AI Controllers (63MC)
(1) Click [Setting contents] in the AI controller
(63MC) measurement value monitoring
screen.
(2) The setting details are monitored, and, AI controller (63MC) setting screen will appear.
[Category]
The measurement category (temperature or
humidity) is shown.
[Upper limit value][Lower limit value]
The upper/lower limits of the measurement
range are shown.
In case of temperature:-100.0°C to 100.0°C
(-148.0°F to 212.0°F)
In case of humidity:0.0% to 100.0%
Note that the range must be fixed between
–30.0°C and 60.0°C (-22.0°F and 140.0°F)
when the temperature sensor for Pt100 detection
(Ch1 only) is used.
[Correction value]
The correction value is shown.
< Settable range >
In case of temperature:-10.0°C to 10.0°C (-18.0°F to 18.0°F)
In case of humidity:-10.0% to 10.0%
[Upper limit alarm detection] [Upper limit alarm cancellation]
[Lower limit alarm cancellation] [Lower limit alarm detection]
The alarm detection value and the alarm cancellation value are shown.
[Time setting]
The current date and time is shown.
(3) Check the checkbox of the channel to be output and
the check box of [Time setting] (when time setting is needed).
(4) Change the settings.
(5) Click [Send settings].
NOTE:
When G(B)-50A or TG-2000A is connected, the setting must be made on G(B)-50A Web Browser or
TG-2000A.
When the settings are made on Maintenance Tools, the setting change is not applied to G(B)-50A or
TG-2000A.