MITSUBISHI ELECTRIC WT03939X20 - Manual (Page 87)

86
(2) The correction value for Pt100 detection is monitored,
and Monitoring of the correction value for Pt100
detection screen will appear.
[Correction value]
The correction value for each Reference correction
point No. is shown.
(3) Click [File output] to save the monitored information
as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.7.]
(4) Click [Close] to return to the AI controller (63MC) measurement value monitoring screen.
3.13.2.5 Measured value history
The measurement values in the past are displayed. Up to 120 of the latest data can be displayed.
(1) Click [Option] in the AI controller (63MC) measurement
value monitoring screen and
select [Measured value history] in the sub-menu.
(2) The measured value history is monitored, and
Measured value history screen will appear.
[Date/Time]
The date and time when the
measurement is made is shown.
[Ch.1 Measurement value]
[Ch.2 Measurement value]
The measurement value of each channel
is shown.
(3) Click [File output] to save the monitored information as a CSV file.
Refer to section [3.13.1.2 Monitoring input/output status on DIDO Controllers (66DC) (5)].
The folder name is
c:¥ProgramFiles¥MntTool32¥Data.
[See section 5.7.]
(4) Click [Close] to return to the AI controller (63MC) measurement value monitoring screen.