beautypg.com

Room monitor, To switch room monitor on, To change the monitor level – Motorola D1110 User Manual

Page 26: To set the dial out number

background image

26

Room Monitor

11. Room Monitor

You can use your D1111 handset to monitor the sounds in another room.
If the sounds reach a certain level the handset will automatically dial out
to a preset external number or to another handset. When the Room
Monitor is set to

On

, the handset will display

Room Monitor On

and only the

microphone will be active to monitor the sound levels in the room. Both
the speaker and receiver will be set to

Off

and the handset will not ring if

there’s any incoming call.

To switch Room Monitor On

1. Press

Menu

, scroll

d

to

Extra

then press

Select

.

Room Monitor

is

highlighted. Press

Select

.

Mode

will be highlighted.

2. Press

Select

, scroll

d

to

On

then press

Select

.

Set to ON

is displayed for 2

seconds. The handset returns to idle screen and disply as

Room

Monitor On

.

To switch off

Room Monitor

press

Off

.

To change the monitor level

The monitor level can be set to High or Low, the default setting is

Low

.

To increase the sensitivity of the Room Monitor:
1. Press

Menu

, scroll

d

to

Level

, press

Select

and scroll

u

or

d

to select

Low

or

High

setting.

To set the dial out number

1. Press

Menu

, scroll

d

to

Call to

and press

Select

.

2. Use the

u

or

d

key to select

External

or

Internal

.

External

1. Press

Select

and

Enter Number:

prompt will be displayed.

2. Enter the number and press

Save

.

Saved

will be displayed.

When

Room Monitor

is switched on and the sound level reaches a

certain level the number will be automatically dialled.

Internal

1. Press

Select

and the registered handset will be listed, for example

Handset 2

.

2. Scroll

u

or

d

to select the handset the

Room Monitor

will call if the noise

levels reach a certain level.

3. Press

Select

and

Set to handset 2

is displayed.

NOTE
If only one handset is registered the display prompts

Not available

and

returns to the previous screen. You must register additional handsets
before the handsets will be displayed and make Internal calls.
NOTE
If the Room Monitor is triggered to call a handset or number and the
called handset is on a call, an alert tone of 3 beeps will be heard. If the
Room Monitor is triggered continuously the alert beap will be emiitted
every 5 seconds.
WARNING
This product is not intended for use as a baby safety device and is not a
substitute for adult supervision.