System pin, Restore default settings, Default settings – Motorola D1110 User Manual
Page 20
20
Base settings
4. Press
u
or
d
to
On
or
Off
then press
Select
to confirm.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
System PIN
The System PIN is used when changing certain settings and registration
/ de-registration. The default setting is 0000. You can change this to your
own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
System PIN
and press
Select
.
4. Enter the old PIN (original setting 0000) and press
OK
.
5. Enter the new PIN and press
OK
.
6. Re-enter the new PIN and press
OK
.
7. Press
Back
to return to the previous menu level or
>
to return to
standby.
Restore default settings
You can restore your D1111 to its default (original) settings.
It will not affect the phonebook, calls list or user’s data, including
personal/recorded outgoing messages and answer machine messages.
All handsets registered to the base will be retained. All text, answer
machine, handset and base settings will be reset.
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
Master Reset
and press
Select
.
4. Select
Yes
to confirm or
No
to cancel.
5. Enter the system PIN (original setting 0000) then press
OK
. The
display will show
Reset Compete
and the unit will restart.
Default settings
Handset Name
Handset
Handset Ringtone
Melody 3
Handset Ring Volume
3
Receiver Volume
4
Key Beep
On
Auto Talk
On
Screensaver
Clock
Base Ringtone
Melody 1
Base Ring Volume
3
Dialling Mode
Tone
First Ring
Off
System PIN
0000
ECO Mode
Off
Room Monitor
Off
Answer Machine
On
Outgoing Message
Answer & Record
Ring Delay
6 rings