Eco mode, Clock & alarm, Date & time – Motorola D1110 User Manual
Page 21: Set alarm, Alarm on /off
Clock & alarm
21
ECO mode
To reduce the level of power emissions, you can select low power or ECO
mode. When the ECO mode is set to
On
, the base transmission power will
be reduced.
To turn ECO Mode to
On
or
Off
:
1. Press
Menu
, scroll
d
to
Settings
and press
Select
.
2. Scroll
d
to
Set Base
and press
Select
.
3. Scroll
d
to
ECO Mode
and press
Select
.
4. Press
u
or
d
to highlight
On
or
Off
then press
Select
to confirm.
The display will show
Set to ON
or
Set to OFF
depending on the selection
together with a confirmation tone.
When set to
ON
,
icon is displayed in place of the standard signal icon.
NOTE
When ECO mode is set to
ON
, the handset range will be reduced.
6. Clock & alarm
Date & time
If you subscribe to your network’s caller display service, the base sets the
date and time for all handsets whenever a call is received. You can
manually set the time on an individual handset.
1. Press
Menu
, scroll
d
to
Clock & Alarm
and press
Select
.
2.
Date & Time
is highlighted, press
Select
.
3. Enter the date using the format DD/MM/YY.
4. Enter the time and press
Save
.
5. Press
Back
to return to the previous menu level or
>
to return to
standby.
Set alarm
When the alarm is set, the display shows the
icon.
Each handset can have a different alarm setting.
1. Press
Menu
, scroll
d
to
Clock & Alarm
and press
Select
.
2. Scroll
d
to
Alarm
and press
Select
.
3. Press
u
or
d
to select
On
and press
Select
.
4. Press
u
or
d
to select
Once
,
Monday-Friday
or
On Daily
and press
Select
.
5. Enter the time you want the alarm and press
Save
.
6. Press
Back
to return to the previous menu level or
>
to return to
standby.
If the alarm was set to
Once
, the
will disappear from the screen.
If set to
On Daily
or
Monday-Friday
, the
will remain on the screen.
Alarm on /off
Once an alarm has been set, you can switch the setting On or Off.
1. Press
Menu,
scroll
d
to
Clock & Alarm
and press
Select
.
2. Scroll
d
to
Alarm
and press
Select
.
3. Press
u
or
d
to select
On
or
Off
and press
Select
.
4. Press
Back
to return to the previous menu level.
Signal icon in
ECO mode