Mitel 5606 - Manual (Page 39)

Alarm Operation (5606 Alarm Model Only)
33
Alarm Operation (5606 Alarm Model Only)
Push-button Alarm
Press the red alarm button twice within two seconds to activate the alarm. An information text
line (default “Personal Alarm” ) is displayed. The alarm is sent to the alarm central, which
distributes it further. The handset then returns to standby mode. Note that you can trigger the
alarm anytime: when you are speaking, editing your settings, or while the phone is locked.
Test Alarm
Press and hold the red alarm button until the information text (default "Test Alarm") is displayed.
No-movement Alarm
You can enable or disable the alarm function in the menu, see “Deactivate/Activate
No-movement alarm” on page 28. You can also program a Soft/Hot key as a shortcut to the
function, see “Edit a Soft key” on page 28. The Soft/Hot key then enables/disables the alarm.
Pressing the Soft key, or pressing and holding the Hot key toggles the alarm. The “No-movement
alarm on” icon displays to indicate that the No-movement alarm is enabled.
Send No-movement alarm
The No-movement alarm will go off when you have not moved within a preset time (the default
is 30 seconds). Before the alarm is activated, a warning signal sounds and the “No-movement
on” icon flashes. If you do not cancel the alarm by pressing any key (or the headset button if
this parameter is set), the alarm is sent and “No-movement/man-down Alarm” is shown in the
display.
Re-activate the No-movement alarm
After a no-movement alarm has been sent, alarm function can be reset by pressing a key or
by moving the handset.
Man-down Alarm
You can enable or disable the alarm function in the menu, see “Deactivate/Activate Man-down
alarm” on page 28, or by programming a Soft/Hot key as a shortcut to the function, see “Edit
Note: Even when the handset is locked (Phone Lock or Key pad lock), you can press a
key to reset the warning signal.
Note: You cannot press the alarm button to reset the warning signal.
Note: The handset must be equipped with the optional Alarm Module.