Mitel 5606 - Manual (Page 37)

Menu Operation
31
Set the Clock Manually
1. With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2. Use the Down navigation key to highlight General and then press the Right navigation key.
3. Use the Down navigation key to highlight Clock and then press the Right navigation key.
4. Use the Down navigation key to highlight Manual setting and then press the Select soft
key.
5. Enter the Time, Year, Month and Day in the formats shown below and then press the Save
soft key.
Example: Time:0815, Year:2008, Month:03, Day:30.
Set the Clock to be Visible/Invisible in Standby Mode
1. With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2. Use the Down navigation key to highlight General and then press the Right navigation key.
3. Use the Down navigation key to highlight Clock and then press the Change soft key. The
"Clock visible" feature is enabled/disabled.
Turn On/Off Automatic Keypad Lock
1. With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2. Use the Down navigation key to highlight General and then press the Right navigation key.
3. Use the Down navigation key to highlight Auto key lock and then press the Change soft
key. The "Auto key lock" feature is enabled/disabled. In standby mode a locked keypad is
indicated by the “Locked keypad” icon (
).
Enable/Disable Quick Answer
1. With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2. Use the Down navigation key to highlight General and then press the Right navigation key.
3. Use the Down navigation key to highlight Quick answer and then press the Change soft
key. The "Quick answer" feature is enabled/disabled.
Set New Messages to be Displayed Upside down
1. With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2. Use the Down navigation key to highlight General and then press the Right navigation key.
3. Use the Down navigation key to highlight New message rotated and then press the
Change soft key. The "New message rotated" feature is enabled/disabled
When this parameter is set, call information for incoming calls is also displayed upside down.
Note: If an interactive message or a message with manual acknowledge is received, the
soft key alternatives remain hidden until a button is pressed and the message is rotated
to standard view.