Motorola DIGITAL DS6708 - Manual (Page 73)

Decoding Preferences 5 - 5
Decode Aiming Pattern
Parameter # F0h, 32h
This parameter only applies in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming pattern
during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
Low Light Enhancement
Parameter # F1h, 64h
In Scanstand mode, selecting Enable Low Light Enhancement causes illumination to remain on at a low level in
low lighting conditions. Select Disable Low Light Enhancement to prevent illumination from remaining on under
these conditions.
NOTE With Picklist Mode on page 4-10 enabled, the decode aiming pattern flashes even when the Decode
Aiming Pattern is disabled.
*
Enable Decode Aiming Pattern
(02h)
Disable Decode Aiming Pattern
(00h)
Enable Low Light Enhancement
(01h)
*Disable Low Light Enhancement
(00h)