Motorola DIGITAL DS6708 - Manual (Page 245)

Symbologies 13 - 69
Composite Beep Mode
Parameter # F0h, 8Eh
To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
GS1-128 Emulation Mode for GS1 Composite Codes (formerly UCC/EAN Code 128 Emulation
Mode for UCC/EAN Composite Codes)
Parameter # F0h, ABh
Select whether to enable or disable this mode.
Single Beep after both are decoded
(00h)
*
Beep as each code type is decoded
(01h)
Double Beep after both are decoded
(02h)
Enable GS1-128 Emulation Mode for
GS1 Composite Codes
(01h)
*
Disable GS1-128 Emulation Mode for
GS1 Composite Codes
(00h)