Motorola DIGITAL DS6708 - Manual (Page 124)

8 - 2 Symbol DS6708 Digital Scanner Product Reference Guide
Connecting to an IBM 468X/469X Host
Connect the digital scanner directly to the host interface.
Figure 8-1 IBM Direct Connection
Figure 8-2 IBM Direct Connection for Scanner with Base
1. Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the digital scanner.
See
Installing the Interface Cable on page 1-3 .
2. Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
3. Select the port address by scanning the appropriate bar code from Port Address on page 8-4 .
4. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Host Port Connector
Interface Cable
Interface Cable
Host Port Connector
NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 8-1 and Figure 8-2
are examples only. The connectors may be different than those illustrated, but the steps to connect the
scanner are the same.
NOTE The only required configuration is the port address. The IBM system typically controls other digital scanner
parameters.