Motorola DIGITAL DS6708 - Manual (Page 169)

Scanner Emulation Interface 11 - 7
Convert Newer Code Types
The digital scanner supports a variety of code types that are not decodable by attached decoder systems. To allow
compatibility in these environments, the digital scanner converts these code types to more commonly decodable
symbologies, as per the following chart. Symbologies not listed on this chart transmit normally.
When decoding these code types with this parameter disabled, the digital scanner issues Convert Error beeps and
transmits no data. The amount of data in the scanned newer bar code type should not exceed that of the
conversion code type.
Module Width
The standard module width is 20 µs. For an extremely slow decoder system, select 50 µs Module Width.
Scan this Code Type: Transmitted as:
Code 11 Code 39
GS1 DataBar (14, Limited, and Expanded), Coupon Code, PDF, MicroPDF,
MaxiCode, Data Matrix, QR Code, Postal Codes, Composite Codes Code 128
*Convert Newer Code Types
Reject Newer Code Types
*20 µs Module Width
50 µs Module Width