Setup field(s), Setup field(s) -30 – Motorola DIGITAL DS6708 User Manual
Page 328
15 - 30
Symbol DS6708 Digital Scanner Product Reference Guide
Setup Field(s)
Table 15-2
Setup Field(s) Definitions
Parameter
Description
Page
Move Cursor
Move Cursor To a Character
Scan the
, then any printable ASCII
character from the
Alphanumeric Keyboard on page 15-91
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning of the data.
Move Cursor Past a Character
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, then
the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
, then select a character from the
If the character is not there, the cursor does not move (i.e., has no
effect).
Move Cursor Past a Specific
String
This action moves the cursor past the first occurrence of a selected
string. Scan
Move Cursor Past Specific String
, then select the
character(s) (up to 10) using the
. Scan the
End of Message bar code on page 15-100
Move Cursor to Specific String
and Replace
This action moves the cursor to the first occurrence of a selected string
and replaces the string with another user-defined string. Scan
Cursor to Specific String and Replace
, then enter an alphanumeric
string representing the character(s) (up to 10) to match and delete
using the
. Enter
another alphanumeric string representing the character(s) (up to 10) to
insert using the
. Scan
Move Cursor to Last
Occurrence of String and
Replace All
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and
, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
. Enter another alphanumeric
string representing the character(s) (up to 10) to insert using the
. Scan
.
Skip to End
Scan
to move the cursor to the end of the data.