Motorola DIGITAL DS6708 - Manual (Page 130)

9 - 2 Symbol DS6708 Digital Scanner Product Reference Guide
Connecting Using Wand Emulation
To perform Wand Emulation, connect the digital scanner to a mobile computer, or a controller which collects the
wand data and interprets it for the host.
Figure 9-1 Wand Emulation Connection
Figure 9-2 Wand Emulation Connection for Scanner with Base
1. Attach the modular connector of the Wand Emulation interface cable to cable interface port on the digital
scanner (see
Installing the Interface Cable on page 1-3 ).
2. Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or
controller.
Wand Port
Interface Cable
Mobile Computer
Interface Cable
Wand Port
Mobile Computer
NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 9-1 and Figure
9-2 are examples only. The connectors may be different than those illustrated, but the steps to connect the
scanner are the same.