Motorola DIGITAL DS6708 - Manual (Page 115)

RS-232 Interface 7 - 17
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
Beep on
If you enable this parameter, the digital scanner issues a beep when it detects a character on the RS-232
serial line. indicates an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On Character
(Enable)
*
Do Not Beep On Character
(Disable)