Motorola DIGITAL DS6708 - Manual (Page 164)

11 - 2 Symbol DS6708 Digital Scanner Product Reference Guide
Connecting Using Scanner Emulation
To perform Scanner Emulation, connect the digital scanner to a mobile computer, or a controller which collects the
data and interprets it for the host.
Figure 11-1 Scanner Emulation Connection
Figure 11-2 Scanner Emulation Connection for Scanner with Base
1. Attach the modular connector of the Scanner Emulation interface cable to the cable interface port on the digital
scanner. See
Installing the Interface Cable on page 1-3 .
2. Connect the other end of the Scanner Emulation interface cable to the scanner port on the mobile computer or
controller.
Host Port Connector
Interface Cable
Interface Cable
Host Port Connector
NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 11-1 and Figure
11-2 are examples only. The connectors may be different than those illustrated, but the steps to connect
the scanner are the same.