Motorola BRUTE NNTN7794B User Manual
Page 109
99
Cont
a
c
ts
To create a Contacts entry:
1.
Press /
> Contacts > [New Contact]
.
2.
To assign a name to the entry:
Ⅲ
Select
Name
. Enter the name and press r.
3.
To assign a ring tone or picture to the name
(optional):
Ⅲ
Select
Ring Tone/Picture
, select a ring tone or
picture, and then press
Back
(right softkey).
4.
To assign a Contacts type to the number or
address being stored:
Ⅲ
Highlight the Contacts type field.
Ⅲ
Scroll left or right to select a Contacts type
(
Mobile
,
DC
,
Work1
,
Work2
,
Home
,
,
Fax
,
Pager
,
Talkgroup
,
Group
,
IP
or
Other
).
5.
To store a number or address:
Ⅲ
Select the # field (or ID for an email address, or IP
for an IP address).
Ⅲ
Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
Connect numbers, be sure to include the
asterisks (*).
Ⅲ
For email addresses, see “Entering Text” on
page 16.
Ⅲ
When you are finished, press r.
6.
To assign more options to the number, including
Speed #
and
Voice Name
, select
[Options]
and
proceed to steps 7-9. Otherwise, skip to step 10.
7.
The default Speed Dial number assigned to a
phone number is displayed in the
Speed #
field.
This is always the next available Speed Dial
location. To assign the phone number to a different
Speed Dial location:
Ⅲ
With the
Speed #
field highlighted, press r.
Ⅲ
Press
Delete
(right softkey) to delete the current
Speed Dial number.
Ⅲ
Enter the new Speed Dial number and press r.
8.
To create a voice name for a number, select
Voice
Name
. Follow the prompts to record a name.
Speak clearly into the microphone.
9.
When you are finished, press
Back
(right softkey).
10.
To add more numbers or addresses to the entry:
Ⅲ
Scroll past the information you already entered.