Minolta PageWorks/Pro 18 - Manual (Page 73)

4.4 NIC Configuration
4-22
NetWare Conf
iguration
Chapter 4
4.4 NIC Configuration
The MAP or a Web Browser must be used to define the context and tree
of the Print Server. It is also used to change the Print Server name, set
in a password, modify scan and frame search parameters, and sent in
bindery-mode specific values.
Use the MAP or Web Browser (refer to Chapter 3) to access the Setup
pages of the NIC. Once you have accessed the Network Setting pages
or the Main Menu, do the following:
1.
Select Setup NetWare under Protocols.
2. Click on Enable NetWare . If it is not selected, the NetWare proto-
cols will not come up, the NIC will not appear as an advertised
device, and the NIC will not be accessible using IPX SNMP.
3. The default name for the NetWare Print Server is MLT_123456,
123456 is the serial number of the NIC. This is also the name of
the printer in peer-to-peer mode. If you want to change the default
Print Server name, type this name in the
Print Server Name
space. Leave the space blank if the default name is to be used.
4. If you want the NIC login with a password, this password may be
entered in the
Print Server Password field, and again in the
Password Retype field. If a password is used, this password must
be the same password for all bindery-based and NDS-based Print
Server entries.
5. Type the name of a preferred bindery-based file server in the Pre-
ferred File Server field. The Preferred File Server entry is signifi-
cant only for bindery or bindery emulation based operations. Refer
to 4.1.9 Preferred File Servers for the significance of a Preferred
File Server. The Print Server must be configures on the Preferred
File Server. Incorrect setup of a Preferred File Server can interfere
with NetWare printing.
PageWorks.book Page 22 Tuesday, August 4, 1998 11:21 AM