Minolta PageWorks/Pro 18 - Manual (Page 121)

6.2 UNIX Printing
6-34
TCP/IP Configuration
Chapt
er 6
2. Select your system. Choose one from these options:
1) AT&T/SVR4; 386
2) SCO UNIX System V
3) None of the above
Type 1 , 2 , or 3 and press .
3. “What is the node name of the NIC?”
Type the name assigned in the /etc/hosts file and press .
For example: Type printfast and press .
4. “What is the printer name for this NIC-linked printer?”
Type a printer name and press .
5. Your screen will now display the information you provided the
install script. For example:
Node name of the NIC: printfast
Printer name to be used:
The printer is attached on: PORT 1
6. “Do you want to accept this configuration?”
Type yes or no and press .
7. “Is this printer PostScript?”
Type yes or no and press .
8. The script automatically starts the daemon for the newly config-
ured printer. It also displays the path used should you ever need to
restart the daemon. In the preceding example, the path would be:
/usr/nic/lpr_print /dev/nic/
printfast 10001 &
This example reflects names supplied the script earlier.
When the installation script is complete, you must still configure the
printer and make it known to the lp system.
Enter
Enter
Enter
Enter
Enter
Enter
PageWorks.book Page 34 Tuesday, August 4, 1998 11:21 AM