Minolta PageWorks/Pro 18 - Manual (Page 62)

4.2 Configuring NetWare 4.x — Bindery Emulation
4-11
NetWare Conf
iguration
Chapter 4
Note
4.2.2 Configure in Bindery Mode with
PCONSOLE
Once you confirm the server has Bindery Context, use the following
procedure to configure the NIC.
1.
Log into the network as ADMIN.
2. Type PCONSOLE and press . The following screen appears.
3. When the Available Options menu appears, press (for the
Bindery Mode).
Note
4. From the Available Options screen, select Quick Setup and press
.
• The command at the console prompt takes effect immediately. The def-
inition in the autoexec.ncf file takes effect when the server is shut down
and then restarted.
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
• If you receive a message asking you to login to a server with Bindery
connections, the server you are attached to does not have Bindery
Mode enabled. Follow the procedures in 4.2.1 Confirm Bindery Con-
text or log onto a server with Bindery Services activated.
Enter
F4
Enter
PageWorks.book Page 11 Tuesday, August 4, 1998 11:21 AM