GTO UL325 SERIES - Manual (Page 32)

29
Control Box Settings
FCC Regulation
This device complies with FCC rules Part 15.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept an interference that
may cause undesired operation.
Transmitter distance may vary due to circumstances
beyond our control. NOTE: The manufacturer is
not responsible for any radio or TV interference
caused by unauthorized modifications to
this equipment. Such modifications could
void the user’s authority to operate
the equipment.
SET
LIMIT
LEARN
TRANSMITTER
ON
1 2 3 4 5 6 7
DIP
5
2
1
6
Release the “LEARN TRANSMITTER” button. Then release
the remote button. The new code is now programmed. Fill in
boxes below with your transmiter code for your records. Replace control box cover.
3
SET
LIMIT
LEARN
TRANSMITTER
STATUS
ON
1 2 3 4 5 6 7
DIP
4
Replace and secure back cover of the opener remote. Go to control box. Press and hold the remote and “LEARN
TRANSMITTER” buttons simultaneously for 5 seconds.
Setting Personal Transmitter Code
Example
1 2 3 4 5 6 7 8 9
Fill In Code For Your Records
1 2 3 4 5 6 7 8 9