GTO UL325 SERIES - Manual (Page 15)

x2
3/8” Bit
5/16” Bit
Drill
Pliers
Level
Clamp Adjustable
Wrench
Pen
Center
Punch
Hammer
Tape
Measure
Small
Flat Head
Philips Head
Screwdriver
Flat Head
Screwdriver
Wire
Stripper
Hack Saw
3/8”
wrench
7/16”
wrench
• Low voltage wire will be needed to run from the
transformer to the control box; length depends upon
the distance between the transformer power supply
and the control box. See Power Wire Installation on
page17, and the accessory catalog.
• PVC conduit.
• If your gate is more than 1000' away from an ac
power source you will need to use at least one
Mighty Mule® 5 watt solar panel to trickle charge
the battery. See the accessory catalog (Do not use
both transformer and solar).
• If you have thin walled tube or panel gates, see
Recommended Reinforcement Examples in “Quick
Reference Guide” after Step 3 of “Mounting Opener
to Gate” section.
• Depending on the type of gate, a horizontal cross
member or mounting plate may be needed to mount
the front of the opener and gate bracket to the gate.
See Gate Bracket Mounting Examples in “Quick
Reference Guide” after Step 3 of “Mounting Opener
to Gate” section.
• Surge protection for transformer.
• Some types of installations require u-bolts.
• If the gate is a push-to-open refer to page 16 in
Installation Manual.
• Additional washers or a metal plate may be needed
for wooden post.
• Outlet in weatherproof cover.
• Strain relief nuts for accessory devices.
• If post is more than 6”, bolts longer than 8” are
needed.
Items Not Included
Before You Begin
Tools Needed
12