Grizzly 1 1/2 HP Cyclone G0703 - Manual (Page 35)

Model g0703/g0703p (Mfg. Since 3/12)
-33-
section 5: operations
damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. always wear safety glasses and
a respirator when operating this machine.
to reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before operating.
NOTICE
if you have never used this type of machine
or equipment before, We strongly rec-
ommend that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
regardless of the content in this section,
grizzly industrial will not be held liable for
accidents caused by lack of training.
general operation
this cyclone dust collector creates a vortex of
incoming air that extracts heavy wood chips (see
figure 50) and large dust particles, and then
drops them into the steel drum below, which is
lined with a plastic bag.
figure 50. Model g0703 flow.
the remaining fine dust travels past the impel-
ler and is then caught by the filter cartridge and
is deposited in the plastic collection bag below.
this filter is made of spun-bond polyester, which
catches 99.9% of particles from 0.2 to 2 microns
in size, and is pleated to provide maximum sur-
face area for efficient airflow.
to maintain CFM during heavy dust collection
operations, the cleaning hand crank is manu-
ally rotated and the internal filter flaps knock off
caked-on dust into the plastic collection bag,
which is fitted to the bottom of the filter canister.
incoming
Wood
Chips and
Fine dust
Fine
dust
Wood
Chips