Grizzly Air Wonder Vacuum Kit H0587 - Manual

Specifications
Operating Pressure .................................. 90 PSI
Air Inlet ....................................................
1 ⁄
4
" NPT
Weight ......................................................1 1 ⁄
2
lbs.
Inventory (Figure 1) Qty
A. Hose ........................................................... 1
B. Vacuum ...................................................... 1
C. Extension Tube .......................................... 1
D. Hose Clamps .............................................. 2
E. Dust Collection Bag .................................... 1
MODEL H0587
AIR WONDER
VACUUM KIT
INSTRUCTION SHEET
Figure 1. Model H0587 inventory.
COPYRIGHT © MARCH, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL9088 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury.
INJURY HAZARD!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation.
120 PSI
MAX AIR PRESSURE!
Exceeding this PSI may
result in injury/tool damage.
A
C
B
D
E
Assembly
1. Insert the extension tube into the front of the
vacuum, and install a 1 ⁄
4
" NPT male quick-dis-
connect fitting (not included) into the bottom
of the vacuum.
2. Place a clamp on the funnel-shaped end of
the hose, insert the vacuum into the hose,
and tighten the clamp (see
Figure 2).
Figure 2. Vacuum kit assembled.
3. Place a clamp over the dust collection bag,
insert the end of the hose into the bag, and
tighten the clamp (see
Figure 2).
LUNG INJURY HAZARD!
Always wear a respirator
during use to reduce
exposure to dust.
Trigger
Hose
Clamps