GarrettCom 6K25 User Manual
Page 50
Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)
43
www GarrettCom com
.
.
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2 6 T
LK
RX
ACT
F/H
TX RX
LK
ACT
F/H
TX RX
LK
ACT
F/H
TX RX
LK
ACT
F/H
1 5
3
2
1
FULL/HALF
1
ACTIVITY
LINK
2
3
5.2.1c 6KP4-
FLSTFX,
2@10Mb &
2@100Mb
multi-mode
FX-ST “twist
lock” Module
The Magnum 6KP4-
FLSTFX is a combo fiber
module with two 10Mb +
two 100Mb multi-mode
fiber module and in
combine 4 ST-Fiber ports.
All four fiber ports are ST connectors and configured as 10Mb Half-duplex by default for
10Mb fiber and 100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow
the user to connect their legacy 10Mb network to the Magnum 6K25 switch. They also
provide a convenient way for the half duplex hub to connect to the switch through 10Mb
fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of
Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km
distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a
special order).
Each port has an Activity (ACT) LED indicating packets being
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC
“snap-in” Fiber connector
The Magnum 6KP6-
RJMSC is also a Combo 6 Port
module equipped with 4 10/100Mb
RJ-45 ports along with 2 multi-
mode 100Mbps fiber optic
transceivers all in one module. This
is similar to the 6K6-RJMST. It has
the same LEDs indicating port
activity (ACT), Link (LK), and
6KP6-RJMSC,
4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port
4
FULL/HALF
1
ACTIVITY
LINK
2
4
3
3
10/100
1 3 5 7
2 6
TX RX
TX
LK RX
LK
ACT
F/H
ACT
F/H
10/100
LK
F/H
ACT
2
1