beautypg.com

Important safety instructions – GoVideo D640 User Manual

Page 4

background image

4

Important Safety Instructions

1

Read Instructions - All the safety and

operating instructions should be read

before the product is operated.

2

Retain Instructions - The safety and

operating instructions should be retained

for future reference.

3

Heed Warnings - All warnings on the

product and in the operating instructions

should be adhered to.

4

Follow Instructions - All operating and

using instructions should be followed.

5

Cleaning - Unplug this product from the

wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

6

Attachments - Do not use attachments not

recommended by the product manufacturer

as they may cause hazards.

7

Water and Moisture - Do not use this

product near water - for example near

a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a

swimming pool; and the like.

8

Accessories - Do not place this product

on an unstable cart, stand, tripod, bracket,

or table.The product may fall, causing

serious injury to a child or adult, and

serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold

with the product.

Any mounting of the

product should follow

the manufacturer’s

instructions and

should use a

mounting accessory

recommended by the

manufacturer.

9 A product and cart

combination should be moved with care.

Quick stops, excessive force, and uneven

surfaces may cause the product and cart

combination to overturn.

10

Ventilation - Slots and openings in the

cabinet are provided for ventilation and to

ensure reliable operation of the product

and to protect it from overheating. These

openings must not be blocked or covered.

The openings should never be blocked by

placing the product on a bed, sofa, rug, or

other similar surface. This product should

not be placed in a built-in installation

such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s

instructions have been adhered to.

11

Power Sources - This product should

be operated only from the type of power

source indicated on the marking label.

If you are not sure of the type of power

supplied to your home, consult your

product dealer or local power company.

For products intended to operate from

battery power, or other sources, refer to the

operating instructions.

12

Grounding or Polarization - This

product may be equipped with a polarized

alternating - current line plug (a plug having

one blade wider than the other). This plug

will fi t into the power outlet only one way.

This is a safety feature. If you are unable

to insert the plug fully into the outlet, try

reversing the plug. If the plug should still

fail to fi t, contact your electrician to replace

your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

13

Alternate Warnings - This product is

equipped with a three-wire grounding-type

plug, a plug having a third (grounding) pin.

This plug will only fi t into the outlet, contact

your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of

the grounding-type plug.

14

Power-Cord Protection - Power-supply

cords should be routed so that they are

not likely to be walked on or pinched by

items placed upon or against them, paying

particular attention to cords at plugs,

convenience receptacles, and the point

where they exit from the product.

15

Outdoor Antenna Grounding - If an

outside antenna or cable system is

connected to the product, be sure the

antenna or cable system is grounded so

as to provide some protection against

voltage surges and built-up static charges.

Section 810 of the National Electrical Code,

ANSI/NFPA 70 provides information with

regard to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit,

size of grounding conductors, location

of antenna-discharge unit, connection to

grounding electrodes, and requirements for

the grounding electrode.