GoVideo D640 - Manual (Page 18)

18
4 - Settings (cont.)
Parental Control Password
To set or change the Parental Control
password:
1 Press SETUP.
2 Press 22  /  to
select “SYSTEM
SETUP”.
3 Press 33
 / 
to select
“PASSWORD”, then press  .
4 Use the number keys to enter a 4-digit 44
password.
• The factory pre-set password is “0000”.
• The numbers you enter will be shown as
X on the screen.
5 Press 55 ENTER.
• The Lock icon will change from closed to
open.
• You are now free to change the Parental
Control rating (see below).
Parental Control Rating
The Parental Control feature enables you
to block playback of movies based on their
ratings. For example, if you set the rating level
to 5, the player will block playback of movies
rated 5, 6, 7 and 8 unless the correct password
is entered. Note: You can only use the Parental
Control feature with rated DVD discs.
1 Press SETUP.
2 Press 22  /  to
select “SYSTEM
SETUP”.
3 Press 33  /  to
select “RATING”,
then press  .
• The Lock
icon under
PASSWORD
must be open
in order to select RATING.
4 Press 44  /  to select the desired rating and
press ENTER.
5 Press SETUP or select “EXIT SETUP” to
exit the menu system.
Restore Defaults
Select “Default” to restore the DVD player to its
factory default settings.
1 Press SETUP.
2 Press 22  /  to
select “SYSTEM
SETUP”.
3 Press 33
 /  to
select “NEXT
PAGE”, then
press ENTER.
4 Press 44  /  to select “DEFAULT”, then
press  .
• “RESTORE” will be highlighted.
5 Press 55 ENTER.
• The player’s factory settings will be
restored.
6 Press SETUP or select “EXIT SETUP” to
exit the menu system.
Resume Playback
You can choose to have the player resume
playback of a disc after it is removed and
reinserted.
1 Press SETUP.
2 Press 22
 /  to select “SYSTEM SETUP”.
3 Press 33  /  to select “NEXT PAGE”, then
press ENTER.
4 Press 44  /  to select “RESUME”, then
press  .
5 Press 55  /  to turn the Resume feature on
or off.
• When Resume is set to on: If you eject
a disc and then put it back in the player,
the disc will resume playback from the
same point on the disc.
6 Press SETUP or select “EXIT SETUP” to
exit the menu system.