Gateway DVD Player - Manual (Page 81)

75 www.gateway.com
Turning on progressive scan
If you connected the player to your TV using the Component Out jacks, you can change
the video output to Progressive Scan for superior video quality.
To turn on progressive scan:
■ While playback is stopped, press VIDEO OUT repeatedly to cycle through the video
settings until “Progressive Scan” appears on the screen. You need to set this only
once.
Displaying disc information on the screen
You can select the type of information to display on the TV screen during DVD playback.
To select the information to display:
1
Press DISPLAY to view information about the disc being played.
2
Press DISPLAY once to view elapsed/remaining time.
3
Press DISPLAY again for detailed disc information such as disc type, title number,
chapter number, angle number, audio soundtrack, and subtitle language.
4
Press DISPLAY again to turn off the display.
Selecting audio channels
You can select a specific audio channel from all the available audio channels.
To select an audio channel:
1
Press AUDIO during VCD playback.
2
Press AUDIO repeatedly to select the audio channel you want to hear, such as STEREO ,
LEFT , and RIGHT .
Playing photo CDs
Photo CDs contain JPG images that you can view on your TV.
To view images on a photo CD:
1
Insert a photo CD into the disc tray. The first image on the disc displays on the TV
screen.
2
To display the previous or next image, press PREV or NEXT .