Gateway DVD Player - Manual (Page 35)

29 www.gateway.com
Configuring for other formats
This option sets the outgoing digital audio for formats not covered in the previous
procedures.
To set your digital output for other formats:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Digital , then press ENTER . The
Digital audio setup menu opens.
3
Highlight NextPage , then press ENTER .
4
Highlight Others , then press the buttons to select:
■ Bitstream
Outputs digital audio signals from the optical or coaxial digital audio jacks.
■ Off
Turns off audio output for other formats.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
5
Highlight OK , then press ENTER .